TECVAL MBT-2.3DT

MBT2.3DT-06 - TECVAL,S.L., 2021 all rights reserved.

MBT-2.3DT
2-Way 3-Valve Transmitter Direct Coupling Manifold Working Pressures: 100 \| 420 bar (1500 \| 6000 PSI)
TECVAL MBT-2.3DT manifolds are designed to work with fluids under high pressure and/or high temperature service. Their distribution diagram consists of three valves commanding three lines: high pressure, low pressure and a by-pass line to restart the instrument. The coupling is manufactured according to EN 61518. Four screws 7/16” UNF and two PTFE joints to assemble the transmitter are supplied.

Features

	High-strength forged body.
	Metal-to-metal shut-off.
	PTFE packing.
	100% tested.

Options

	Flange x Flange. B
	Movable stem tip. F
	Grafoil packing for high temperatures. G
	High working pressure 420 bar (6000 PSI). I
	Two bleed screws in outflow. P
	Four screws M10 instead of 7/16" UNF. Z

Technical data
Max. Pressure	Standard pressure: 100 bar (1500 PSI) High pressure: 420 bar (6000 PSI)
Temperatures	-20ºC/400ºC (-4ºF/752ºF)
Orifice Size	4
Order codes
NPT	3150
BSP	3151
SW	3152

* Dimensions in mm

Materials

Nº	Part	AISI-316L A4	Duplex AD	SuperDuplex AS	Special alloys
1	Set screw	AISI-304 (1.4301)	AISI-304 (1.4301)	AISI-304 (1.4301)	AISI-304 (1.4301)
2	Handle	AISI-316L (1.4404)	AISI-316L (1.4404)	AISI-316L (1.4404)	AISI-316L (1.4404)
3	Nut	AISI-316L (1.4404)	AISI-316L (1.4404)	AISI-316L (1.4404)	AISI-316L (1.4404)
4	Bonnet	AISI-316L (1.4404)	Duplex (1.4462)	Superduplex (1.4410/ 1.4501)	Special alloy
5	Gland	AISI-316L (1.4404)	AISI-316 (DIN1.4401)	AISI-316L (1.4404)	AISI-316L (1.4404)
6	Packing	P.T.F.E.	P.T.F.E.	P.T.F.E.	P.T.F.E.
7	Stem	AISI-316L (1.4404)	Duplex (1.4462)	Superduplex (1.4410/ 1.4501)	Special alloy
8	Body	AISI-316L (1.4404)	Duplex (1.4462)	Superduplex (1.4410/ 1.4501)	Special alloy
9	Screw	AISI-316L (1.4404)	AISI-316L (1.4404)	AISI-316L (1.4404)	AISI-316L (1.4404)
10	Joint	P.T.F.E.	P.T.F.E.	P.T.F.E.	P.T.F.E.

Special alloys

Among the wide range of alloys existing, TECVAL has selected those considered by our customers as most suitable, which we stock to ensure a quick and effective supply. Whether you do not find the required alloy or need further information about our exotic alloys valves and fittings, please address your inquiry to our Technical Department.

AISI-316Ti (1.4571) A6
AISI-904L (1.4539) A9
254-SMO (1.4547) AV
Alloy 400 (2.4360) MO
Alloy 625 (2.4856) IN
Alloy 825 (2.4858) CO
Titanium Gr.2 (3.7034) TI
Hastelloy C-276 (2.4819) HA

Ordering information

References are formed by three parts:

Manifold Code Look for it in the order codes chart on the previous page.	..	Option/s -If required, add the code/s from the options section on the previous page (in alphabetical order)	...	Material -Look for the code on the materials chart.
An example of manifold and two options: Manifold MBT-2.3 DT 1/2"NPT 254-SMO with movable stem tip and two bleed valves in outflow: 3150 FP AV The reference to place the order is 3150FPAV.

Tests

According to API STANDARD 598, each manifold is tested to check the leakage in the seat and packing. Under request, the corresponding materials and test certificates can be delivered with the manifold.

Packaging

All TECVAL manifolds are supplied packed in individual polyethilene airtight bags. End screw connections are protected with polyethilene caps. Everything is 100% recyclable.

Maintenance

Adjustment of the packings may be necessary during the working life of the manifold. The operation consists of turning the nuts (3) clockwise.
Manifolds with long no-working period may have a harder initial operating torque.